21. Releases notes

21.1. what’s new in 1.7.1

• Adds the release note in the document

21.2. what’s new in 1.7.0

• Fixes

  • Example error fixes

• Refactor the simulation parametric element

• FloatingRef addition

• Exchanges pole and residue order to fit to the name of the dataset

• Adds the complexConjugatePoleResidue floatingType

• Add tilted mesh

• Modification on ZsZt4 for the 4x4 matrix

• Add ZsZtxy and ZsZt4 for surface impedance

• Long reals, doubles are authorized in Vector and DataSet floatingType

• Reference the figure by number

21.3. what’s new in 1.6.3

• Adds some more index

• Adds wire plate connection definition

• _build images are ignoreed

• Adds some index entries

• Permittivity and permeability can be expressed by rational function

21.4. what’s new in 1.6.2

• Add quad9 unstructured element

21.5. what’s new in 1.6.1

• Add dipole cloud source

• Add gain, efficiency and directivity to physical quantities

• Usage of rthetaphi coordinate system for far quantities of antenna

21.6. what’s new in 1.5.3

• Add a level to the toctree

• Add impedance, admittance, energyFluxDensity physical quantity

• CamelCase column names for rational function (Nominator and Denominator) have been replaced by lower case.

• Fixe some example link example

• PhysicalModel / Grid modifications

• Typo fixes

21.7. what’s new in 1.5.2

• Add couplingCrossSection physicalNature

21.8. what’s new in 1.5.1

• A lot of typo fixes, thanks to :

  • Solange Bertuol (ONERA)

  • Vladimir Sedenka (BUT)

• Add rational with pole definition

• Update physicalNature summary

• Update /physicalModel/Grid

• Add Zs example

• Add electricPotentialPoint physicalNature

21.9. what’s new in 1.5.0

• A lot of fixes in the output request section (selectorOnMesh usage)

• Add the /physicalModel/grid definition

21.10. what’s new in 1.4.0

• A lot of typo fixes

• /physicalModel/multiport ‘s nbPort attribute has been removed - it was redondant with the dimension of the floatingType

• /physicalModel/shield category has been added

• /physicalModel/connexion category has been added

• Network’s junction definition refactoring

21.11. what’s new in 1.3.0

• SelectorOnMesh refactoring (6.4)

• Structured mesh : the indexes of the nodes begins with 0

21.12. what’s new in 1.2.0

• Typo fixes

• New elementary unstructured shapes (6.2.3.3)

• Numbering of structured and unstructured sub-elements

• Update od arraySet component parameter (5.6.3)

• Update of numerical data on mesh for unstructured and structured mesh (5.6.4)

• Some mode aperture (9.10)

21.13. what’s new in 1.1.0

• Typo fixes

• Magnitude decay attribute -> delay (8.1)

• A new canonical element : ellipse (6.2.3.2)

• A new RLC circuit model (9.6.8)

• A new surface model : ZsZt2 (9.8.5)

21.14. what’s new in 1.0.1

• Typo fixes

• Bug fix : 2D entity elements in unstructured mesh group are named ‘face’

• Bug fix : /label children are datasets and not tables In links, subject_XX becomes subject_id

21.15. what’s new in 1.0.0

• Typo fixes

• The /arraySet category is renamed in /floatingType category (5.1)

• Adds singleInteger floatingType (5.2.1)

• Adds singleString floatingType (5.2.4)

• Adds unit=date for time (19.2)

• Adds arraySet and coordinate system relations (5.6.7)

• Adds complement group in arraySet (5.6.6)

• Adds surface material models (9.8)

• Adds predefined output requests (15.2)

• Modifies predefined physicalModel

  • /physicalModel/perfectElectricConductor

  • /physicalModel/perfectMagneticConductor

  • /physicalModel/vacuum

21.16. what’s new in 0.6

• Typo fixes

• By default angular are expressed in degree

• add the ‘output’ attribute to output request objects

• complete refactoring of /exchangeSurface category

• /externalElement children are datasets and not tables

• Add a level to the /mesh category -> /mesh/$gmesh/$mesh to allow to meshes inside an Amelet-HDF instance.

• Bug : Retrevial of the ‘topology’ attribute in /network.

21.17. what’s new in 0.5

• Typo fixes

• Network refactoring (compound network has been added)

• General rational function floatingType has been added

• Predefined links refactoring

• Circle and plane elements are oriented (6.2)

• Integer ans real usage chapter has bee added (2.5)

• Table and data chapter has been added (2.7)

• extentionType / linksDefinition / specificRole has renamed property

• Frequency range validity attributes have been added to physical models

• Some more predefined links for networks

• Correction in interval definition (5.2.1)

• physicalModel / volume / magnetic conductivity can be defined as electrical conductivity is defined (debye, lorentz, rational, complex array..)

• Electrical and magnetic conductivity have become a complex array.

• The /extensionType / $type / $intance / linksDefitions is a dataset

• remove physicalModel groundModel category

21.18. what’s new in 0.4

• Typo fix

• (v1, v2, v3) are relative distance in selectorOnMesh/element

• Explanatory note on generator

• Predefined links chapter

• Adds canonical element orentation (plane, circle)

• Structured grid example image for structured mesh description

• Explanatory information about group added

• a structured grid image has been added

21.19. What’s new in 0.3

• Add the predefined label dataset

  • /label/predefinedLabels

  • wireRadius label to associate a radius to a wire

• Add the aperture category with :

  • Slot

  • Circular aperture

  • Measured aperture

  • Question about semi-empirical aperture

• Add canonical elements with their code

  • plane

  • circle

  • cone

  • cylinder

  • sphere

• Refactor planeWave section and Antenna section, add some images

• Add the notion of symmetry, not stable

  • xinf / xsup

  • yinf / ysup

  • zinf / zsup

  • electricWall / magneticWall

• Add a note to precise localization system

21.20. What’s new in 0.2

• /link category has been added.

• /label category has been added.

• /externalElement has been added. Multi file capability, linkFile has been suppressed and a /externalElement has been added. linkDefinition is still

• /outputRequest are now described. Rests the predefined output requests. in the specification.

• /transmissionLine uses the new link capability with the new attributes section and elementInSection. transmission line element do not have nameInMesh attribute any longer.

• Unstructured mesh, the element type code has been added.

• /simulation input specific role are expressed thanks to a /link instance.

• /dataInLocalization has been removed and uses the new /link category.

• Many bugs fixes.